Very good job!!
Merry Christmas to all !!
2013-12-24
2013-12-21
New wiring design for the hand
I have modified quite a few things on the hand,
and so I had to print it all over again with a new forarm. What is very
different, is the lining which is much, much more easy than before.
Read more................
Read more................
2013-12-17
2013-12-10
Some tutos...
How many times was I asked about the connections I made from the servos to the Arduino…
I decided to upload once and for all the way I did it, even if it is not very contionnal.
You will find the instructions in the Assembly/Other Tutorials tab under:
Creating the connectors
Read More...............
I decided to upload once and for all the way I did it, even if it is not very contionnal.
You will find the instructions in the Assembly/Other Tutorials tab under:
Creating the connectors
Read More...............
2013-12-04
InMoov at the Paris 3D PrintShow.
I'm going to post this as is, I'm running out of
time and there is too much things going on. If I don't keep up I feel
like I will be submerged.
So, this post is not really arranged but at least it's posted.
Funny how french people made me talk!
In Roma, I barely had to speak and would operate the robot almost the whole day long.
In London I had to talk a lot to explain the project and I would operate the robot as well.
In Paris, I just talked and explain everything over and over and barely could operate the robot.
At the end of the day we were washed out!
The french would approach us with caution, but once they understood we were not selling anything, the barrier was down and they were very, very enthusiast. We got good contacts and there is good chance it will bring more involvement in the near future.
We tried to make pictures but somehow the light with our camera was all dark and yellow, very disappointing, there wasn't any natural light in the show room. So I will only post others videos and pictures here.
Here is a video done by Russian people in visit in Paris, I feel like I gave the ball to the robot a thousand times, during these shows, it is time he learns other tricks and stuff. :)
Read more..........
So, this post is not really arranged but at least it's posted.
Funny how french people made me talk!
In Roma, I barely had to speak and would operate the robot almost the whole day long.
In London I had to talk a lot to explain the project and I would operate the robot as well.
In Paris, I just talked and explain everything over and over and barely could operate the robot.
At the end of the day we were washed out!
The french would approach us with caution, but once they understood we were not selling anything, the barrier was down and they were very, very enthusiast. We got good contacts and there is good chance it will bring more involvement in the near future.
We tried to make pictures but somehow the light with our camera was all dark and yellow, very disappointing, there wasn't any natural light in the show room. So I will only post others videos and pictures here.
Here is a video done by Russian people in visit in Paris, I feel like I gave the ball to the robot a thousand times, during these shows, it is time he learns other tricks and stuff. :)
Read more..........
2013-11-12
InMoov London 3D Print Show
London 3D Print Show was very interesting.
It was a 3 days event, so plenty of time to demonstrate, meet people, talk a lot, to the point that my voice started to change at some point.
And the robot didn't brake any printed part, but I burned 2 servos. The reason, in the right arm I'm still using the first version for to attach the servos, and the wires got tangled between themselves and caused an overstress. Smoke came out of the arm + an awfull smell, very easy to recognize.
Unfortunatly I had no more spare servos because I had used them for to demonstrate the Leap Motion in another printed arm. (see video)
Read more......
It was a 3 days event, so plenty of time to demonstrate, meet people, talk a lot, to the point that my voice started to change at some point.
And the robot didn't brake any printed part, but I burned 2 servos. The reason, in the right arm I'm still using the first version for to attach the servos, and the wires got tangled between themselves and caused an overstress. Smoke came out of the arm + an awfull smell, very easy to recognize.
Unfortunatly I had no more spare servos because I had used them for to demonstrate the Leap Motion in another printed arm. (see video)
Read more......
2013-10-30
3D PrintShow London Paris + Prosthetic
InMoov will be presented for the 3D Print Show in London and Paris.
London 7-9 november, Business Design Center
Paris 15-16 november, Carrousel du Louvres.
I do keep myself busy lately... A bit too much in fact.
Make is organising a big robot hack and InMoov is involved. There should be a bunch of hangout sessions. This is going to be fun!! Chuck Fletcher, who presented his robot InMoov to the New York MakerFaire is going to be part of the sessions as well.
Here is the link to the article.
Read More....
London 7-9 november, Business Design Center
Paris 15-16 november, Carrousel du Louvres.
I do keep myself busy lately... A bit too much in fact.
Make is organising a big robot hack and InMoov is involved. There should be a bunch of hangout sessions. This is going to be fun!! Chuck Fletcher, who presented his robot InMoov to the New York MakerFaire is going to be part of the sessions as well.
Here is the link to the article.
Read More....
Subscribe to:
Posts (Atom)