Neck for InMoov

You can now download the neck with the mechanism that makes the head tilt and pan. 
Get it on Cubehero.
Okay, I guess this is going to be like this. The head contains many parts, so I divised in different sections.
There is a part of the skull that is necessary for to do the final mounting of the neck mechanism with servos, it is situated at the rear of the head. I made a piece called "temporary", which you will withdraw once I upload the skull.
I have to make the step by step of the neck, pictures are done, but I need to write the text.
Hope you enjoy it.


  1. yes i so exiting to find the inmmov head

  2. why i receive this message?
    you can see my message
    Delivery to the following recipient failed permanently:


    Technical details of permanent failure:
    The group inmoov@googlegroups.com does not allow posting through email.

    1. @ambroise,
      You must have tried posting a comment on the blog using the forum mailer. That's all I can see, because emailing to the forum is available normaly.

  3. This comment has been removed by the author.

  4. I'm one big fan of your project keep going. It's amazing

  5. Beautiful work Gael! Nice looking prints too!

    1. Hi, thanks. I hope your Rostock Max will do the job as you expect. I think it will!

  6. Dear Gael, your project is marvellous

    A big hug from italy

    1. Thanks for your support. Are you printing InMoov?

    2. Hi Gael.
      No.. i haven't any manual ability.. I've only seen your project on the most important italian newspaper


      Since then, I'm becme an your fan :)

    3. Well thank you, I saw that italy has been following pretty much my blog lately, it is certainly due to the article you mention.
      By the time a french newspaper is going to write something over InMoov, the rest of the world will have forgotten it. LoL

  7. Thank you Gaël, Will start printing today - 20130304.

    Is there a print order to print and assemble to the torso. That is so not to collect a pile to assemble all at once?

    Thanks - Brian

  8. Well, I would suggest starting from the bottom to top, if you look a picture where the neck is assembled. Peter has posted on thingiverse a picture which demonstrate pretty much the order.
    Hey by the way I just received the Atlantic magazines, thanks a lot for sending them over. I really appreciate. Write to you in email soon.

  9. Gaël, could you post the servo you use for the neck/head? Or the specs.? I started printing and it looks like the parts are for the 1/4 size servos. That is the size you use for InMoov's Shoulder and Biceps @ 20Kg-cm. Is that right? Why so big? I have several standard servos - the TowerPro SG-5010 which, are rated at 11Kg-cm. Shouldn't 11Kg-cm be good for turning the head and neck?

    1. Hi Brian,
      Yes I used the same servos as for the shoulder and biceps. They are over rated somehow. Turning the head uses a bit more torque than the up-down. I guess if you have 11kg-cm servos it should do the trick.
      I used heavy one because I had already the casing designed in my Blender files, and had them at hand for to test right away.

    2. This comment has been removed by the author.

  10. Thank you Gaël,

    I'll make plugs/spacers then and see if I can use the smaller servos.


  11. Hi there exceptional website! Does running a blog such as this require a large amount of work? I've absolutely no understanding of programming however I was hoping to start my own blog soon. Anyway, should you have any suggestions or techniques for new blog owners please share. I understand this is off subject but I just had to ask. Cheers! The Gaming Club bears a license from the executive of Gibraltar, and claims to be one of a pick few casinos that have a license from the Gibraltar government. A advocate of the Interactive Gaming Council (IGC), The Gaming Club follows all the guidelines laid next to by the organization, something that has taking into consideration a long showing off in it bodily approved as a good area to gamble online.

    Everything very nearly The Gaming Club scr888 how to win feels good; be it the promotions, the big number of games, the compound banking options upon offer, the futuristic security measures, or the fair and held responsible gaming practices the casino adopts.

    The Gaming Club motors along upon software developed by one of the giants of online gaming software move ahead Microgaming. The software it uses is advocate and has a range of features intended to total your online gambling experience and make you desire to come support after every circular of gambling you attain here.

    Another hallmark of a good casino is the environment of its customer withhold team, and The Gaming Club does not disappoint upon this front.